ТОП просматриваемых книг сайта:
Poly(lactic acid). Группа авторов
Читать онлайн.Название Poly(lactic acid)
Год выпуска 0
isbn 9781119767466
Автор произведения Группа авторов
Жанр Химия
Издательство John Wiley & Sons Limited
81 81. A. Gupta, V. Katiyar, Cellulose functionalized high molecular weight stereocomplex polylactic acid biocomposite films with improved gas barrier, thermomechanical properties, ACS Sustain. Chem. Eng. 2017, 5(8), 6835–6844.
82 82. A. Gupta, A. Prasad, N. Mulchandani, M. Shah, M. Ravi Sankar, S. Kumar, et al., Multifunctional nanohydroxyapatite‐promoted toughened high‐molecular‐weight stereocomplex poly(lactic acid)‐based bionanocomposite for both 3D‐printed orthopedic implants and high‐temperature engineering applications, ACS Omega 2017, 2(7), 4039–4052.
83 83. Bioplastics MAGAZINE, “Total corbion PLA launches full stereocomplex PLA technology”, Polymedia Publisher GmbH, Mönchengladbach, Germany, Issue 03, May 2018
84 84. A. Greiner, J. H. Wendorff, Electrospinning: a fascinating method for the preparation of ultrathin fibers, Angew. Chem. Int. Edn. 2007, 46(30), 5670–5703.
85 85. Y. Furuhashi, Y. Kimura, H. Yamane, Higher order structural analysis of stereocomplex‐type poly(lactic acid) melt‐spun fibers, J. Polym. Sci. Part B‐Polym. Phys. 2007, 45, 218–228.
86 86. M. Takasaki, H. Ito, T. Kikutani, Development of stereocomplex crystal of polylactide in high‐speed melt spinning and subsequent drawing and annealing processes, J. Macromol. Sci. Part B 2003, 42(3–4), 403–420.
87 87. M. Takasaki, H. Ito, T. Kikutani, Development of stereocomplex crystal of polylactide in high‐speed melt spinning and subsequent drawing and annealing processes, J. Macromol. Sci. Part B Phys. 2007, 42(3 & 4), 403–420.
88 88. D. Masaki, Y. Fukui, K. Toyohara, M. Ikegame, B. Nagasaka, H. Yamane, Stereocomplex formation in the poly(l‐lactic acid)/poly(d‐lactic acid) melt blends and the melt spun fibers, Sen'i Gakkaishi 2008, 64(8), 212–219.
89 89. B. Wang, B. Li, J. Xiong, C. Y. Li, Hierarchically ordered polymer nanofibers via electrospinning and controlled polymer crystallization, Macromolecules 2008, 41(24), 9516–9521.
90 90. S. Boi, L. Pastorino, O. Monticelli, Multi applicable stereocomplex PLA particles decorated with cyclodextrins, Mater. Lett. 2019, 250, 135–138.
91 91. O. Monticelli, M. Putti, L. Gardella, D. Cavallo, A. Basso, M. Prato, et al., New stereocomplex PLA‐based fibers: effect of POSS on polymer functionalization and properties, Macromolecules 2014, 47(14), 4718–4727.
92 92. S. Regnell Andersson, M. Hakkarainen, S. Inkinen, A. Södergård, A.‐C. Albertsson, Customizing the hydrolytic degradation rate of stereocomplex PLA through different PDLA architectures, Biomacromolecules 2012, 13(4), 1212–1222.
93 93. C. Zhu, W. Jiang, J. Hu, P. Sun, A. Li, Q. Zhang, Polylactic acid nonwoven fabric surface modified with stereocomplex crystals for recyclable use in oil/water separation, ACS Appl. Polym. Mater. 2020, 2(7), 2509–2516.
94 94. N. J. Kaiser, K. L. K. Coulombe, Physiologically inspired cardiac scaffolds for tailored in vivo function and heart regeneration, Biomed. Mater. 2015, 10(3), 034003.
95 95. P. Mogha, A. Srivastava, S. Kumar, S. Das, S. Kureel, A. Dwivedi, et al., Hydrogel scaffold with substrate elasticity mimicking physiological‐niche promotes proliferation of functional keratinocytes, RSC Adv. 2019, 9(18), 10174–10183.
96 96. X. Zhao, H. Hu, X. Wang, X. Yu, W. Zhou, S. Peng, Super tough poly(lactic acid) blends: a comprehensive review, RSC Adv. 2020, 10(22), 13316–13368.
97 97. H. Liu, J. Zhang, Research progress in toughening modification of poly(lactic acid), J. Polym. Sci. Part B Polym. Phys. 2011, 49(15), 1051–1083.
98 98. F. Wu, M. Misra, A. K. Mohanty, Super toughened poly(lactic acid)‐based ternary blends via enhancing interfacial compatibility, ACS Omega 2019, 4(1), 1955–1968.
99 99. Y. Kang, P. Chen, X. Shi, G. Zhang, C. Wang, Preparation of open‐porous stereocomplex PLA/PBAT scaffolds and correlation between their morphology, mechanical behavior, and cell compatibility, RSC Adv. 2018, 8(23), 12933–12943.
100 100. N. Mulchandani, K. Masutani, S. Kumar, H. Yamane, S. Sakurai, Y. Kimura, et al., Toughened PLA‐b‐PCL‐b‐PLA triblock copolymer based biomaterials: effect of self‐assembled nanostructure and stereocomplexation on the mechanical properties, Polym. Chem. 2021, 12(26), 3806–3824.
6 STRUCTURES AND PHASE TRANSITIONS OF PLA AND ITS RELATED POLYMERS
Hai Wang and Kohji Tashiro
6.1 INTRODUCTION
This chapter focuses on the structure and phase transition behavior of PLA and related polymers. The crystal modifications of PLA revealed so far are the mesophase [1–5], the δ (α′) phase [5–10], the α phase [11–16], the β phase [17–20], the γ phase [21, 22], the ε phase [23–26], and the stereocomplex (SC) between PLLA and PDLA [27–37]. The relationship between the chain conformation and aggregation state of chains in these crystalline modifications and the resulting intrinsic physical properties has to be understood for the improvement of the physicochemical property of PLA products. Besides, the unknowns about the crystal structure information make it difficult to fully understand the phase transition behaviors between the various crystal forms. In this way, the establishment of reliable and precise structures of PLA crystalline forms and the clarification of their phase transition behaviors are indispensable for the development of PLA.
The similar situation is seen also for the crystal structures of poly(3‐hydroxybutyrate) (PHB). By adding one CH2 unit to the basic chemical formula of PLA (─[─C*H(CH3)OCO─] n ─), PHB (─[─CH2C*H(CH3)OCO─] n ─) is obtained. One skeletal C atom is optically asymmetric and so the PHB polymer chain may take also the L and D enantiomeric species similarly to those of PLLA and PDLA. This apparently slight difference of chemical structure between PLA and PHB, however, provides the remarkably different characters with respect to the helical chain conformation and the chain packing mode, as well as the crystallization behavior itself. Additionally, there are many kinds of aliphatic polyesters, which can show relatively high biodegradability comparable with that of PLA and PHB. For example, poly(ethylene adipate) (PEA) has the linear chemical formula without CH3 side groups, ─[─OCH2CH2OCO(CH2)4CO─] n ─. In some cases, PEA is blended with PLA or PHB to control the biodegradability. To understand the crystallization behavior of PEA and PLA in these blends, it is indispensable to know the structure of PEA at the starting point.
In the present chapter, the crystal structures and phase transition behaviors of PLA are mainly discussed, but, at the same time, such related polyesters as PHB and PEA are also reviewed to extract the similarity and differences between these polyester compounds, from the structural points of view.
Although many review articles have been published about the structures, the phase transition behaviors and the relation between structure and property of these polymers [38–41], we need to realize the most reliable and accurate information, which were derived mainly from the quantitative analyses of the X‐ray diffraction and vibrational spectroscopic data, are introduced in the present chapter.
6.2 STRUCTURAL STUDY OF PLA
6.2.1 Preparation of Crystal Modifications of PLA
To elucidate the detailed crystal structures and phase transition behaviors of PLLA, X‐ray diffraction method of highly oriented and highly crystalline samples is most useful. Figure 6.1 shows that the various crystal modifications are obtained depending on the sample preparation conditions. When the sample in the molten state is quenched into ice water, predominantly amorphous‐phase PLA is obtained [4, 5]. Casting PLA films using chloroform