Скачать книгу

&c.c.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 50 for cravats and collars, 100 for pocket-handkerchiefs, 20 for petticoats; tatting-pin No. 2 or 3.

Tatting Medallion.

      This pattern is suitable for trimming cravats, collars, pocket-handkerchiefs, petticoats, &c.c., according to the size of the cotton with which it is worked. Work first the round of circles which incloses the leaves, overlapping each other in the centre; begin with the smallest circle, which is at the top of the pattern; it consists of 3 double, 1 purl, 7 double, 1 purl, 7 double, 1 purl, 3 double. Then work at a short distance another circle like the preceding one, only work 8 double instead of 7, and instead of working the first purl, fasten the circle on to the last purl of the preceding circle; all the other circles are fastened on to each other in the same manner. The next circle, worked again at a distance of about one-fifth of an inch, has 4 double; fasten it on to the preceding circle, 9 double, 1 purl, 9 double, 1 purl, 4 double. The following four circles are worked like the preceding one; only work in the first of these circles 10 double instead of 9, in the second 11 double, in the third 12 double. The piece of cotton which joins the circles together must also be somewhat longer between the larger circles. Then work a circle [69] as follows: 5 double, fasten the cotton, 13 double, 1 purl, 13 double, 1 purl, 5 double; then a similar circle, but always working 14 double instead of 13. The next circle consists of 6 double, fasten the cotton, 15 double, 1 purl, 15 double, 1 purl, 6 double; the two following circles are worked in the same manner, working 16 double instead of 15. Then comes the largest circle of the round, which consists of 6 double, 17 double, 1 purl, 17 double, 1 purl, 6 double. Work 11 circles more [70] like the 2nd to 12th of those just described (the 13th circle forms the middle), only the order of sizes must be reversed, so that the round closes with the smallest circle. Then fasten both ends of the cotton together, so that the circles are joined into a circle. Then work round this row of circles another round, the circles of which must be of graduated sizes like those of the first round. Fasten the cotton on to the middle purl of the first small circle of the first round, and work one circle as follows:--3 double, 1 purl, 6 times alternately 2 double, 1 purl, then 3 double; fasten the cotton on to the middle purl of the next circle, &c.c. The remaining circles are worked in the same manner, only they must be increased and decreased in size gradually like the circles of the first round; this is done by increasing or decreasing the number of purl, instead of working the first purl of every following circle, fasten it on to the last purl of the preceding circle. When the round is completed, fasten both ends of the cotton together. In the centre of the oval pattern, fasten 6 five-branched patterns of graduated size, which are worked in one piece. For the smallest of these patterns work first three circles, consisting of 5 double, 1 purl, 5 times alternately 2 double, 1 purl, then again 5 double (these circles must be close to each other; the second and third circles must, moreover, be fastened on to the last purl of the preceding circle). The cotton is then fastened on the first circle between the beginning and the end of the same, then work close to them two small circles, consisting of 6 double, 1 purl, 6 double, fasten the cotton between the beginning and the end of the third circle. The other five-branched patterns are worked in the same manner at intervals of about three-tenths of an inch; but the separate circles of each pattern must become gradually larger. In the largest pattern the three large circles consist of 5 double, 1 purl, [71] 8 times alternately 2 double, 1 purl, 5 double; the two smaller circles consist each of 15 double, 1 purl, 15 double; the size of the other patterns can easily be worked from this; the cotton which joins these last together is covered by over-casting with a needle and thread, so as to imitate double stitches. The five-branched patterns are then fastened in the oval pattern; they must overlap each other to half way, as seen in the illustration.

      59.--Tatted Diamond.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 40, or 80 if required finer; tatting-pin No. 3.

Tatted Diamond.

      This pattern is meant to ornament lingerie; it is worked with fine tatting cotton in the following manner:--Work a * circle consisting of 6 double, 1 purl, 6 double, turn the circle downwards and work at a short distance another circle consisting of 5 double, 4 purl divided by 2 double, 5 double; at a similar distance a circle of 5 double fastened on to the last purl of the preceding circle, 2 double, 5 purl divided by 2 double, 5 double; then again a circle consisting of 5 double fastened on to the last purl of the preceding circle, 2 double, 3 purl divided by 2 [72] double, 5 double: fasten the cotton on to the first circle. Then turn the work so that the last three circles are turned downwards, leave an interval of at least three-fourths of an inch, and repeat three times more from *, fastening the circles on to each other from illustration. Knot together the beginning and end of the cotton, work button-hole stitches round the cotton which joins the circles, as shown in illustration. The purl stitches of the four middle circles of the diamond are knotted together.

      60.--Tatted Cravat End.

      Materials: Messrs. Walter Evans and Co.'s tatting cotton No. 50; tatting-pin No. 3; 2 shuttles.

      This cravat end is given in full size. It is ornamented with a tatted medallion, edged with lace. The tatting is worked with tatting fine cotton and two shuttles. Make first the two rosettes which form the centre of the medallion, then the insertion-like part which edges the rosettes. The larger rosette is worked as follows:--Knot the cotton of both shuttles together and work with 1 shuttle only 1 circle consisting of 10 double, 1 purl one-fifth of an inch long, 10 double; * close to this circle, which is turned downwards, work over the cotton with the other shuttle, 1 double, 1 purl, 8 double; this forms one of the scallops joining two circles. Then turn the work again and work close to the just completed scallop another circle like the first, but which is joined to the first circle instead of working the purl. Repeat 4 times more from *. Then work another scallop and fasten both ends of cotton on to the cotton over which the first scallop has been worked, at the place where the scallop is joined to the first circle. The first round of the rosette is thus completed.

Tatted Cravat End.

      Work then the 2nd round over the cotton on the 2nd shuttle, beginning to work where the two ends of cotton have [73] been fastened, * 6 double, 1 purl, 5 double, fastened on to the purl of the next scallop of the preceding round, 5 double, 1 purl, 6 double fastened on to the cotton between two scallops of the [74] preceding round; repeat 5 times more from *. The larger rosette is now completed. The smaller rosette is worked like the first, only without the second round. The insertion-like border is worked in two halves as follows:--The half which touches the edge of the medallion is worked as follows:--Knot both ends of cotton together and *, work with 1 shuttle only 1 circle consisting of 8 double, 1 purl one-fifth of an inch long, 8 double; turn the circle downwards and work close to it over the cotton on the 2nd shuttle 6 double, 1 purl, 6 double; this forms a scallop of the border. Then turn the work again and work close to the scallop another circle like the first, but which is fastened on to the first circle instead of working the purl. Turn the work again, work a scallop like the preceding one, and repeat 15 times more from *, only the scallops at the lower edge of the medallion must have a few double stitches more, as can be seen in illustration. After working the last scallop fasten the two ends of the cotton on to the 1st circle; then cut them off. The second inner half is worked like the first; only the circles are worked without any purl stitch, and fastened on to the circles of the first half from illustration; the scallops of this half are somewhat smaller; each consists of 5 double, 1 purl, 5 double. The completed border is sewn on to the rosettes from illustration; the different pieces must be first fastened on cardboard. The cotton must be wound several times round the long threads, as seen in illustration. The medallion is then sewn into the muslin at the top only; the remaining border is edged, before joining it to the muslin, with a straight row of knots to be worked over cotton, and fastened on to each outer scallop of the border at regular intervals. The number of double stitches between two purl is different, as distinctly seen in illustration. For the lace knot both ends of cotton together, * work with one shuttle only 1 circle [75] consisting

Скачать книгу