LITMIR.BIZ

      Figure 7: Discoloration and material loss of sample cubes S1–S4 after 30 cycles of salt bursting test.

       Summary

      The studied monoliths show diverse, partly exposure-specific weathering forms. Under laboratory 214conditions, the negative effects of thermal and thermohygric expansion were identified and are in accordance with the field observations. Water did show to increase the negative effect of thermal expansion on the investigated sandstones. Also its function as a transport medium has to be taken into account. The in-situ investigation showed severe damages associated with salt crystallization, which could be reproduced under laboratory conditions to a lesser extent. Possible protective measures for the future could be temporary roof constructions during seasons of high solar radiation and temperature or a protective planting of trees, which would be a permanent, but more natural solution. Nevertheless, individual monoliths should be considered for conservational treatment due to the high degree of weathering. Desalination and repairs with stone replacement mortars as well as measures to minimize the future salt input into the stone can be crucial. Regarding the origin of the monolith source material, the data from the in-situ and petrographic investigations, point towards a sandstone layer in the Paja Formation as origin of the sandstones S2 and S3. Therefore, further investigation should concentrate on the residual sandstone boulders covering the Paja Formation in the vicinity of the park.

       Acknowledgements

      We would like thank M. Silva Celis, director of the archaeological park Monquirá, for supporting our work as well as C. Gross for helping with the petrographical descriptions.

       References

      Etayo-Serna, F., 1968. Sinopsis Estratigrafica de la region de Villa de Leiva y zonas proximas. Boletín de Geología 8.

      Hirschwald J (1912) Die Prüfung der natürlichen Bausteine auf ihre Wetterbeständigkeit. W. Ernst & Sohn, Berlin.

      Öcal, A. D.; T. Cramer; S. Siegesmund, 2009. Caracterización de agentes del deterioro de los monolitos de piedra arenisca del Infiernito – Colombia, en 2do. Congreso Argentino y 1ro. Latinoamericano de Arqueometría 6–8 de julio de 2007, Tulio Palacios et al. – eds. – Buenos Aires: Comisión Nacional de Energía Atómica – CNEA, 2009, pp. 413–419.

      Patarroyo Gama, P., 2008. La Formacion Ritoque en la zona de Vélez (Santander-Colombia). Geología colombiana 33, 109–110.

      Renzoni, G., Rosas, H., Etayo-Serna, F., 1983. Mapa Geológico de la Plancha 171, Duitama, esc. 1:100.000. Ingeominas, Bogotá.

      Siegesmund, S. and Dürrast, H. (2011), Physical and mechanical properties of rocks. In Siegesmund, S. and Snethlage, R. (Eds.), Stone in architecture, Springer, pp. 97–225.

      Silva Celis, E. (1983) Descubrimiento Arqueológico en Villa de Leiva. Boletín de Antropología 5 (17–19), pp. 235–250.

      Simón, P. 1981. Noticias Historiales de las Conquistas de Tierra Firme en las Indias Occidentales; Biblioteca del Banco Popular, Bogotá.

      215

       EVALUATION OF EFFECTIVE COMPRESSION STRENGTH OF NATURAL STONE BY DRILLING RESISTANCE MEASUREMENTS

Stephan Pfefferkorn¹, Christoph Franzen²

      IN: SIEGESMUND, S. & MIDDENDORF, B. (EDS.): MONUMENT FUTURE: DECAY AND CONSERVATION OF STONE.

       – PROCEEDINGS OF THE 14TH INTERNATIONAL CONGRESS ON THE DETERIORATION AND CONSERVATION OF STONE –

       VOLUME I AND VOLUME II. MITTELDEUTSCHER VERLAG 2020.

1 HTW Dresden, FB Bauingenieurwesen, Friedrich-List-Platz 1, 01069 Dresden, Germany

      2 Institut für Diagnostik und Konservierung an Denkmalen in Sachsen und Sachsen-Anhalt e. V. (IDK), Schlossplatz 1, 01067 Dresden, Germany

       Abstract

      The knowledge of strength parameters for material is necessary for the appraisal of the bearing behaviour of historic buildings. Usually these are determined by suitable check of drilling cores.

      The columns under the vault in the ground floor of the historical city hall in Oederan (Germany, Saxony) are strongly loaded according to continuance statics. For the judgement their load-carrying capacity the pressure resistance should be determined. On account of the statics a cross section reduction was not admitted by taking drilling core. Besides, the columns from Hilbersdorfer Porphyrtuff showed considerable decomposition phenomena in its surfaces. The aim of the investigations was to find out the depth of the structure loosening and to estimate the pressure resistance of the uninjured rest cross section.

      These questions could be answered with the drilling resistance measurement method. Besides, drillings with small diameter and a steady driving are introduced into the material. The measuring value of the drilling resistance arises from the contact force which is necessary for the realisation of the given driving. It can be given for every tenth millimetre of the drilling depth, so that a depth profile of the drilling resistance arises.

      Between compressive strength and the drilling resistance a linear correlation exists. This relation could be determined on the basis of test specimens which were cut of simultaneous removal material. Drilling resistance as well as compressive strength were checked at these cubes and were confronted. Afterwards three drilling opposition measurements were executed per column. From the measuring profiles obtained could be read the depth of the structure decay as well as the drilling resistance of the unweathered core cross section be determined. With these values the compression strength was estimated under use of the before provided correlation function.

       Initial situation and objective

      Two columns made of Hilbersdorf porphyry tuff carry the vault on the ground floor of the town hall in Oederan, Germany (Figure 1). The volcanic Hilbersdorf porphyry tuff is a regionally used historic building material with a wide range of qualities (SIEDEL 2006, KREISSL 2010, WEDEKIND et al. 2013). The columns showed considerable surface loosening due to the influence of damaging salts leading to significant reduce in the static cross-section. Primary static assessments based of some assumed material parameters determined a high probability of failure. That’s why as an emergency 216measure a massive reinforced concrete jacket was placed around the shafts of the pillars to support the load transfer.