LITMIR.BIZ

Скачать книгу

1.10 Immobilization of Lipases for Better Biodiesel Production

Immobilization is the physical binding of enzymes to a solid support in such a way that when the substrate passes over the enzyme support it converted into their product [189]. The vast use of Enzyme immobilization technique at industrial scale is because it results in enzyme stabilization and prolonged enzyme–substrate contact which results in reduction of purification steps. Further, it lowers the reaction cost by making the reaction contamination free and enabling recycling of the enzyme [190]. As the cost of industrial production of lipase enzyme is one of the main obstacle in its industrial application, so it can be eliminated through lipase immobilization [191]. Industrial processes/reactions can be made continuous with little protein using immobilized lipases because of their easy separation from reaction system containing products, by-products, residual substrates, and medium [192]. In transesterifications is the main process involves in biodiesel production using lipase enzyme, the use of immobilized enzyme (extracellular) and immobilized whole-cell (intracellular enzyme) both reported highly efficient as compared to the use of free enzymes. Bayramoglu et al. [59] set two reaction setups, one with free enzyme and other using immobilized enzyme, and then reaction comparison was measured using gas chromatography-mass spectrophotometry (GC-MS) by noticing FAME components. They Candida rugosa lipase was immobilized on microporous bio-silica polymer. Both enzymes then further used for transesterification of Scenedesmus quadricauda microalgal oil using methanol in the presence of n-hexane solvent. Reaction setup having immobilized lipase produced 96.4% yield as compared to free lipase that produced 85.7% yield. Moreover, immobilized lipase was very much stable as it just lost 17% of its activity after six cycles. Kalantari et al. [193] used Pseudomonas cepacia lipase, immobilized on mixture of mesoporous and nanoporous silica coated composite particles, for transesterification of soybean oil into FAME using methanol. Immobilization effect retains 55% enzymatic stability after five consecutive cycles compared to free lipase reaction. Shah et al. [194] showed that three enzymes were selected initially and then Chromobacterium viscosum was further chosen because of its better results. Celite 545 was used as immobilization material applied to enzyme. Transesterification of Jatropha oil using ethanol was conducted with and without immobilized lipase. After immobilization, reaction yield increased from 62% to 71% and then after further addition of water and immobilization, it reached to 92%. Moreover, in another study [85], triolein transesterification was conducted using methanol, ethanol, and immobilized Pseudomonas fluorescens in the presence of 1,4-dioxane solvent. Reaction yield for both free and immobilized lipase reaction setups was same, i.e., 90%. But the stability provided by immobilization, loss of lipase activity was minimal in immobilized reaction setup than other. Reaction time was 10h for immobilized as compared to 25h reaction time in free lipase system. Further, when we use water free media, free enzyme molecules tend to clump together and decreasing the surface area. Enzyme immobilization inhibit clump formation and increase the surface area of the biocatalyst [195]. Kumari et al. [97] carried out transesterification of jatropha oil with Enterobacter aerogenes lipase immobilized on surface and reported high yield (94%) of biodiesel production and noticed that lipase activity reduced in little extent even after repeated use. Enzyme properties like resistance to proteolytic digestion and denaturants, temperature profile, pH-dependence, thermostability, and kinetics are mainly affected by enzyme immobilization. The chief issues for enzyme immobilization are preference for the selection of immobilization techniques and support matrices that permit both rapid enzyme activity and enzyme stability under the constraints imposed by the substrate medium [89, 196]. Some examples of different investigations regarding biodiesel production methods using whole-cell immobilized biocatalysts are given in Table 1.7.

Table 1.6 Some other experiments using recombinant whole catalyst without immobilization.

Expressing lipase source	Substrate	Acyl acceptor	Yield	Reference
Serratia marcescens YXJ-1002	Waste grease	Methanol	97%	[183]
Rhizomucor miehei and Penicillium cyclopium	Soybean oil	Methanol	>95%	[184]
Fusarium heterosporum	Soybean oil	Methanol	95%	[185]
Rhizomucor miehei (RML)	Soybean oil	Methanol	83.14%	[186]
	Microalgal oil	Methanol	>90%	[187]
Thermomyces lanuginosus (Tll)	Waste cooking oil	Methanol	82%	[176]
Rhizopus oryzae IFO4697	Soybean oil	Methanol	71%	[188]

Table 1.7 Investigation of immobilized whole-cell biocatalysts to produce biodiesel.

Lipase cell factory	Immobilized on	Substrate	Acyl acceptor	Yield	Reference
Rhizopus oryzae cells	Biomass support particles	Soybean oil	Methanol	70%–83%	[197]
Mucor circinelloides	Poly-Urethane Foam	Sardine (Sardinella lemuru) oil	Methanol	NA	[198]
Mucor circinelloides URM 4182	polyurethane support	Babassu oil	Ethanol	98.1%	[199]
Rhizopus oryzae IFO4697	biomass support particles	Oleic acid	Methanol	90%	Скачать книгу В начало < 15 16 17 18 19 20 21 22 23 24 > В конец