LITMIR.BIZ

      2

      Plasmonic Solar Cells

       T. Shiyani1, S. K. Mahapatra2 and I. Banerjee1*

       1School of Nanosciences, Central University of Gujarat, Gandhinagar, Gujarat, India

       2School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India

       Abstract

      Photovoltaic (PV) cell is a fundamental solar energy conversion device that converts light energy into electric energy. The light absorption and charge recombination are main limiting factors on the efficiency of PV cell or solar cell. A limited efficiency of PV devices makes them less effective in market for clean energy production. Various tactics and methods are demonstrated to enhance the solar cell performance. Metallic nanoparticles have been utilized to fabricate solar cells because of its novel properties such as large surface to volume ratio and surface plasmon resonance (SPR). Plasmonic nanostructures can influence the absorption of light through scattering of surrounding molecules or particles. The plasmonic nanostructures can scatter or concentrate light at subwavelength scale for increasing absorption in active layer and hence enhancing the efficiency of PV devices. Therefore, the plasmonic nanostructures are promising candidates to develop high efficiency solar cells. We discuss about the fundamental mechanisms, ability to scale up the plasmonic with tailored optical properties, solar cell design, and recent advancements in plasmonic solar cells to generate clean energy and solar fuels.

      Keywords: Plasmonic nanostructures, thin film, surface plasmon resonance, light scattering, solar cell

2.1 Introduction

Solar energy is cleanest energy source among other renewable energy. Earth receives annually about 1.7 × 10⁵ TW energy on the surface of earth that is thousands times more than the total energy consumption of world, i.e., 12–13 TW [1]. Solar cell is a solar energy conversion device that works on photoelectric effect, which is schematically shown in Figure 2.1. The ejected electrons are called photoelectrons [2]. Photovoltaic (PV) cell converts light energy into electrical energy that can work on small and large-scale applications. Solar cell technology can make an important contribution to solve the energy problem on earth for the benefit of the society. The absorber material in solar cell absorbs the sunlight upon and then the electron-hole (e-h) pair is produced. The generated e-h pairs are needed to separate by completing a electric circuit to collect electrons as a flow of current. The cost of solar PV manufacturing is high due to expensive fabrication and toxic elements, which makes this technology less commercialized as compared to fossil fuels and nuclear energy [3, 4].

Schockey-Queisser limit suggests that the efficiency of solar energy to electric energy conversion for a single junction PV device can be achieved upto about 32%. The efficiency for cell consists of two layers, three layers, and a theoretical infinity layer can reach upto 42%, 49%, and 68%, respectively. An existed thin film solar cell technology with midgap infinite bands suggests a maximum efficiency of 77.2%. The single junction monocrystalline and polycrystalline silicon solar cells provide efficiencies about 20%–24% [5, 6]. Silicon solar cells are widely used to develop solar panels for generating electricity. The most of the price in this technology is because of silicon wafers and cell fabrication processes. Therefore, the advanced research is required in solar cell technology to find novel and cheap materials [7]. The thin film PV devices such as CIGS (~21%), GaAs (~37%), cadmium telluride (CdTe, ~19%), and CZTSSe (~13%) have been developed as alternative to silicon but low absorbance of near band gap light is a major problem [8, 9]. The usage of rare earth and toxic elements in CIGS, GaAs, and CdTe solar cells has made them less successful in market. Therefore, the novel design in device configuration is required to absorb maximum sunlight in solar cell. The various nanomaterials such as quantum dot, nanowire, thin film, and biomaterials can be used in combination to improve the performance of PV device. These combinations can enhance the light trapping on the surface of the PV cell. The biohybrid materials have been utilized to absorb wide range of sunlight for developing dye sensitized solar cells (DSSCs) as well as photoelectrochemical cells (PECs). They have achieved maximum efficiency of 30% at research scale [10, 11]. The multijunction solar cells have been demonstrated with maximum conversion efficiency of about 47%. The various intermediate layers have been explored in multi-junction solar cells enhancing the absorption of light and decreasing the recombination rate of e-h pair [12–14]. These solar cell technologies are summarized in Table 2.1.

Скачать книгу