Скачать книгу

act as antimutagens, anticarcinogens [291, 292], and antimicrobial agents [292–294]. Despite their demonstrated bioactive properties, the action of polyphenols on biological systems is complex and disputed because it is affected by bioavailability, doses, metabolism, and other biotransformations. Bioavailability is strictly related to their structures, like degree of glycosylation and conjugation with other polyphenols. For example, polymers such as proanthocyanidins may have direct effects on the stomach [292] and intestinal mucosa, protecting these tissues from oxidative stress or carcinogen action [277]. In addition, non-glycosylated phenolic compounds may be absorbed directly into the small intestine [277]. In turn, to become absorbed in the intestine, polyphenols present in the form of esters, glycosides, or polymers require hydrolyzation by enterocyte enzymes or through the action of colonic microbiote [295]. The antioxidant activity of polyphenols is arguable. On the one hand, studies in cell line cultures have shown that polyphenols are able to reduce oxidative stress and activate the antioxidant response of the cells. On the other hand, they could decrease cell viability and proliferation and induce cell apoptosis by acting as prooxidants and generating free radicals [296]. The effects of polyphenols in cell cultures (either protective antioxidant or prooxidant/cytotoxic) will depend on several factors such as their concentration, their ability to oxidize, their lipophilicity, the content of other antioxidants and metals, and the oxidative stress level of the cell culture [297–299]. Therefore, to safely use polyphenols as bioactive compounds it is necessary to carefully study aspects such as the specific dose, the delivery vehicle, the nutritional and health history, and the characteristics of the microbe.

      2.9 Biopolymer Type Number 8: Polythioesters

      In 2001, Lütke-Eversloh et al. published the first report on microbial polythioesters (PTEs). PTEs were synthesized by the same polymerase which synthesizes PHAs make PTEs unique biopolymers [220, 221, 300]. The first examples of PTEs were copolymers containing 3HB and 3-mercaptopropionate (3MP), which were obtained from the PHA accumulating bacterium Ralstonia eutropha strain H16 – a “model organism” in PHA research. Adding different precursor substrates is a tool for accelerating the polymerization process or for incorporating another monomric forma of PMAs. Polythioester production also includes incorporating monomeric formes of 3-hydroxybutyrate and 3-mercaptobutyrate, poly(3HB-co-3MB). The total polymer yield by R. eutropha, when 3-mercaptobutyric acid was fed as a carbon source in addition to gluconate contributed to up to 31% of the cellular dry weight. Mutants of R. eutropha with defective PHA synthase were not able to synthesize these copolymers. This demonstrated that the PHA synthase is responsible for the incorporation of 3MP and generally for biosynthesis of PTEs. If R. eutropha was cultivated in the presence of either 3-mercaptopropionic acid, 3,3’ -thiodipropionic acid (TDP) or 3,3’ -dithiodipropionic acid (DTDP), the copolymer poly- (3HB-co-3MP) was accumulated comprising molar fractions of 3MP of up to 54 mol-%. None of the sulfur-containing precursor substrates was utilized as sole carbon source for growth, thus, a second carbon source such as sodium gluconate was provided additionally to enable bacterial growth. The copolymer composition and polymer content referring to the cellular dry weight could be influenced by varying cultivation conditions and feeding regimes. When carbon sources, which are metabolized to acetyl coenzymeA(acetyl-CoA) were present in the culture medium of R. eutropha, the molar ratios of 3MP were usually less than 5 mol-%. It was observed that the total polymer yield decreased simultaneously to increasing 3MP content. However, this is not a strict rule, because other factors like the duration of fermentation also influenced the molecular weights of the accumulated polymers. 3-mercaptovalerate (3MV) were identified as constituents of PTE copolymers isolated from R. eutropha, extending the group of PTE constituents, which were referred to as 3-mercaptoalkanoates (3MA) [220, 221, 300].

      2.10 Conclusion

      Acknowledgement

      The author acknowledges his mentors Professor Dr. Alexander Steinbüchel and Professor Dr. Bernd Rhem and the entire membership of the institute of Molecular Mikrobiologie und Biotechnologie, Mathematish-Naturwissenschaftlichen Fakultät der Westfälische Wilhelms-Universitüt Münster, Germany. Special thanks to the members of lab 06. The author acknowledges the DAAD for the grant provided as a PhD scholarship.

      Conflict of Interest

      The author declares that there is no any kind of conflict with any concerning this chapter

      References

      1 1 Ali, N.E., Kaddam, L.A., Alkarib, S.Y., Kaballo, B.G., Khalid, S.A., Higawee, A., AbdElhabib, A., AlaaAldeen, A., Phillips, A.O., and Saeed, A.M. (2020). Gum Arabic (Acacia Senegal) augmented total antioxidant capacity and reduced c-reactive protein among haemodialysis patients in phase II trial. International Journal of Nephrology 2020: 7214673.

      2 2 Kaddam, L., Babiker, R., Ali, S., Satti, S., Ali, N., Elamin, M., Mukhtar, M., Elnimeiri, M., and Saeed, A. (2020). Potential role of Acacia Senegal (Gum Arabic) as immunomodulatory agent among newly diagnosed COVID 19 patients: a structured summary of a protocol for a randomised, controlled, clinical trial. Trials 21 (1): 766.

      3 3 Kaddam, L.A. and Kaddam, A.S. (2020). Effect of Gum Arabic (Acacia senegal) on C-reactive protein level among sickle cell anemia patients. BMC Research Notes 13 (1): 162.

      4 4 Amara, A.A. (2015). Kostenlose Viral Ghosts, Bacterial Ghosts, Microbial Ghosts and More (ed. A.A. Amara). Schüling Verlage Germany. ISBN: 978-3-86523-260-1.

      5 5 Ahmed, A.S., Khalil, A., Ito, Y., van Loosdrecht, M.C.M., Santoro, D., Rosso, D., and Nakhla, G. (2021). Dynamic impact of cellulose and readily biodegradable substrate on oxygen transfer efficiency in sequencing batch reactors. Water Research 190: 116724.

      6 6 Chaudhary, J., Thakur, S., Sharma, M., Gupta, V.K., and Thakur, V.K. (2020). Development of biodegradable agar-agar/gelatin-based superabsorbent hydrogel as an efficient moisture-retaining agent. Biomolecules 10 (6).

      7 7 Dutta, S.D., Hexiu, J., Patel, D.K., Ganguly, K., and Lim, K.T. (2021). 3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering. International Journal of Biological Macromolecules 167: 644–658.

      8 8 Hai, L., Choi, E.S., Zhai, L., Panicker, P.S., and Kim, J. (2020). Green nanocomposite made with chitin and bamboo nanofibers and its mechanical, thermal and biodegradable properties for food packaging. International Journal of Biological Macromolecules 144: 491–499.

      9 9 Ichimaru, H., Mizuno, Y., Chen, X., Nishiguchi, A., and Taguchi, T. (2020). Prevention of pulmonary air leaks using a biodegradable tissue-adhesive fiber sheet based on Alaska pollock gelatin modified with decanyl groups. Biomaterials Science 9: 861–883.

      10 10 Li, M., Dong, Q., Xiao, Y., Du, Q., Huselsteind, C., Zhang, T., He, X., Tian, W., and Chen, Y. (2020). A biodegradable soy protein isolate-based waterborne polyurethane composite sponge for implantable tissue engineering. Journal of Materials Science: Materials in Medicine 31 (12): 120.

      11 11 Olaiya, N.G., Nuryawan, A., Oke, P.K., Khalil, H., Rizal, S., Mogaji, P.B., Sadiku, E.R., Suprakas,

Скачать книгу