Encyclopedia of Renewable Energy - James G. Speight

Скачать книгу

(such as Organic Rankine Cycle and Stirling engines) are currently in the demonstration stage and could prove economically viable in a range of small-scale applications, especially for CHP.

      In the transport sector, first-generation biofuels are widely deployed in several countries – mainly bioethanol from starch and sugar crops and biodiesel from oil crops and residual oils and fats. Production costs of current biofuels vary significantly depending on the feedstock used (and their volatile prices), and on the scale of the plant. The potential for further deploying these first-generation technologies is high, subject to sustainable land use criteria being met.

      First-generation biofuels face both social and environmental challenges, largely because they use food crops which could lead to food price increases and possibly indirect land use change. While such risks can be mitigated by regulation and sustainability assurance and certification, technology development is also advancing for next-generation processes that rely on non-food biomass (e.g., lignocellulosic feedstocks such as organic wastes, forestry residues, high-yielding woody or grass energy crops, and algae). The use of these feedstocks for second-generation biofuel production would significantly decrease the potential pressure on land use, improve greenhouse gas emission reductions when compared to some first-generation biofuels, and result in lower environmental and social risk.

      Second-generation technologies, mainly using lignocellulosic feedstocks for the production of ethanol, synthetic diesel, and aviation fuels, are still immature and need further development and investment to demonstrate reliable operation at commercial scale and to achieve cost reductions through scale-up and replication. The current level of activity in the area indicates that these routes are likely to become commercial over the next decade. Future generations of biofuels, such as oils produced from algae, are at the applied R&D stage, and require considerable development before they can become competitive contributors to the energy markets.

      Further development of bioenergy technologies is needed mainly to improve the efficiency, reliability, and sustainability of bioenergy chains. In the heat sector, improvement would lead to cleaner, more reliable systems linked to higher quality fuel supplies. In the electricity sector, the development of smaller and more cost-effective electricity or CHP systems could better match local resource availability. In the transport sector, improvements could lead to higher quality and more sustainable biofuels.

      Ultimately, bioenergy production may increasingly occur in biorefineries where transport biofuels, power, heat, chemicals, and other marketable products could all be co-produced from a mix of biomass feedstocks. The link between producing energy and other materials deserves further attention technically and commercially.

      Biomass-Derived Carbon

      First, they participate in the relatively rapid biological cycling of carbon to the atmosphere (via engine tailpipe emissions) and from the atmosphere (via photosynthesis). Second, they displace fossil fuels. Fossil fuel combustion releases carbon that took millions of years to be removed from the atmosphere; combustion of biomass fuels participates in a process that allows carbon dioxide to be rapidly recycled to fuel. The net effect of shifting from fossil fuels to biomass-derived fuels is thus to reduce the amount of carbon dioxide in the atmosphere.

      Because of the differences in the dynamics of fossil carbon flow and biomass carbon flow to and from the atmosphere, biomass carbon is often accounted for separately from carbon derived from fossil fuels.

      See also: Biomass, Biomass – Pyrolysis.

      Biomass – Direct Combustion

      Direct combustion of biomass is a thermochemical technique in which the biomass is burned (combusted) in open air or in the presence of excess air. In this process, the photosynthetically stored chemical energy of the biomass will be converted into gases, unless char is also produced.

      There are five thermal approaches that are commonly used to convert biomass into a renewable fuel: direct combustion, gasification, liquefaction, pyrolysis, and partial oxidation.

      When biomass is heated under oxygen-deficient conditions, it generates synthesis gas that consists primarily of hydrogen and carbon monoxide. This syngas can be directly burned or further processed for other gaseous or liquid products. In this sense, thermal or chemical conversion of biomass is similar to that of coal.

      Indoor direct combustion of biomass fuels in unvented cooking and heating spaces has caused considerable health problems to the direct users, primarily the women and children of developing countries. Biomass fuels, when used improperly in this manner, release considerable amounts of toxic or hazardous gases into the unvented area. These gases are typically: carbon monoxide (CO), nitrogen oxides (NOx), hydrocarbon derivatives, organics, aldehydes, and trace amounts of aromatics and ketones. As the moisture content of the wood increases, and as other biomass fuels of lower energy content (such as animal and crop waste) are used, the emissions increase.

      When the direct combustion of biomass is conducted in a well-ventilated area, biomass burning used for domestic stoves and boilers can be a sound substitute for combustion of conventional fossil fuel.

      Most electrical power generation systems are relatively inefficient, due to the loss of a significant portion of energy, as much as half to two-thirds, in a form of waste heat. If this heat is used efficiently for industrial manufacture, space heating, district heating, or other purposes, the overall efficiency can be greatly enhanced. Therefore, smaller biopower systems are more suitable for cogeneration type of processes than much larger counterparts.

      See also: Biomass, Biomass-Chemistry, Biomass – Combustion, Biomass – Gasification, Biomass – Liquefaction, Biomass – Pyrolysis.

      Biomass – Drying

      Biomass with a high moisture content such as sludge is often used as fuel in power plant without proper drying which reduces the efficiency of the boiler. However, by use of a drying process, moisture can be largely removed from biomass. The result is a reduction in the weight of the biomass. This leads to a reduction of the processing costs, as well as of the costs for storage and transport. The dried end product is frequently used as a plant nutrient or it can be used as a fuel. This, however, depends on the properties of the biomass that needs to be dried.

      Dryers can be broadly divided into two categories based on how heat is provided for drying. In direct dryers, the material gets heat from direct contact with a fluid providing the heat – either hot air or hot steam. With indirect drying, the material being dried is separated from the heat source by a heat exchange surface.

      Directly heated dryers can be further divided into two more categories: air and superheated steam dryers (SSDs). In air dryers, hot air is contacted with the material to be dried. The air loses its sensible heat and provides the latent heat of evaporation to dry the material. The air also removes the water

Скачать книгу