CCNA Routing and Switching Complete Study Guide - Todd Lammle

Скачать книгу

layer is topologies, both physical and logical. Understand that every type of network has both a physical and a logical topology.

      ■ The physical topology of a network refers to the physical layout of the devices, but mostly the cabling and cabling layout.

      ■ The logical topology defines the logical path on which the signal will travel on the physical topology.

Figure 1.19 shows the four types of topologies.

Diagram shows the primary physical topology categories such as bus, ring, star and mesh. Physical topology is the physical layout of the devices and cabling.

FIGURE 1.19 Physical vs. Logical Topolgies

      Here are the topology types, although the most common, and pretty much the only network we use today is a physical star, logical bus technology, which is considered a hybrid topology (think Ethernet):

      ■ Bus: In a bus topology, every workstation is connected to a single cable, meaning every host is directly connected to every other workstation in the network.

      ■ Ring: In a ring topology, computers and other network devices are cabled together in a way that the last device is connected to the first to form a circle or ring.

      ■ Star: The most common physical topology is a star topology, which is your Ethernet switching physical layout. A central cabling device (switch) connects the computers and other network devices together. This category includes star and extended star topologies. Physical connection is commonly made using twisted-pair wiring.

      ■ Mesh: In a mesh topology, every network device is cabled together with connection to each other. Redundant links increase reliability and self-healing. The physical connection is commonly made using fiber or twisted-pair wiring.

      ■ Hybrid: Ethernet uses a physical star layout (cables come from all directions), and the signal travels end-to-end, like a bus route.

      Summary

      Whew! I know this seemed like the chapter that wouldn’t end, but it did – and you made it through! You’re now armed with a ton of fundamental information; you’re ready to build upon it and are well on your way to certification.

      I started by discussing simple, basic networking and the differences between collision and broadcast domains.

      I then discussed the OSI model – the seven-layer model used to help application developers design applications that can run on any type of system or network. Each layer has its special jobs and select responsibilities within the model to ensure that solid, effective communications do, in fact, occur. I provided you with complete details of each layer and discussed how Cisco views the specifications of the OSI model.

      In addition, each layer in the OSI model specifies different types of devices, and I described the different devices used at each layer.

      Remember that hubs are Physical layer devices and repeat the digital signal to all segments except the one from which it was received. Switches segment the network using hardware addresses and break up collision domains. Routers break up broadcast domains as well as collision domains and use logical addressing to send packets through an internetwork.

      Exam Essentials

      Identify the possible causes of LAN traffic congestion. Too many hosts in a broadcast domain, broadcast storms, multicasting, and low bandwidth are all possible causes of LAN traffic congestion.

      Describe the difference between a collision domain and a broadcast domain. Collision domain is an Ethernet term used to describe a network collection of devices in which one particular device sends a packet on a network segment, forcing every other device on that same segment to pay attention to it. With a broadcast domain, a set of all devices on a network hears all broadcasts sent on all segments.

      Differentiate a MAC address and an IP address and describe how and when each address type is used in a network. A MAC address is a hexadecimal number identifying the physical connection of a host. MAC addresses are said to operate on layer 2 of the OSI model. IP addresses, which can be expressed in binary or decimal format, are logical identifiers that are said to be on layer 3 of the OSI model. Hosts on the same physical segment locate one another with MAC addresses, while IP addresses are used when they reside on different LAN segments or subnets.

      Understand the difference between a hub, a bridge, a switch, and a router. A hub creates one collision domain and one broadcast domain. A bridge breaks up collision domains but creates one large broadcast domain. They use hardware addresses to filter the network. Switches are really just multiple-port bridges with more intelligence; they break up collision domains but create one large broadcast domain by default. Bridges and switches use hardware addresses to filter the network. Routers break up broadcast domains (and collision domains) and use logical addressing to filter the network.

      Identify the functions and advantages of routers. Routers perform packet switching, filtering, and path selection, and they facilitate internetwork communication. One advantage of routers is that they reduce broadcast traffic.

      Differentiate connection-oriented and connectionless network services and describe how each is handled during network communications. Connection-oriented services use acknowledgments and flow control to create a reliable session. More overhead is used than in a connectionless network service. Connectionless services are used to send data with no acknowledgments or flow control. This is considered unreliable.

      Define the OSI layers, understand the function of each, and describe how devices and networking protocols can be mapped to each layer. You must remember the seven layers of the OSI model and what function each layer provides. The Application, Presentation, and Session layers are upper layers and are responsible for communicating from a user interface to an application. The Transport layer provides segmentation, sequencing, and virtual circuits. The Network layer provides logical network addressing and routing through an internetwork. The Data Link layer provides framing and placing of data on the network medium. The Physical layer is responsible for taking 1s and 0s and encoding them into a digital signal for transmission on the network segment.

      Written Labs

      In this section, you’ll complete the following labs to make sure you’ve got the information and concepts contained within them fully dialed in:

      Lab 1.1: OSI Questions

      Lab 1.2: Defining the OSI Layers and Devices

      Lab 1.3: Identifying Collision and Broadcast Domains

      You can find the answers to these labs in Appendix A, “Answers to Written Labs.”

      Written Lab 1.1: OSI Questions

      Answer the following questions about the OSI model:

      1. Which layer chooses and determines the availability of communicating partners along with the resources necessary to make the connection, coordinates partnering applications, and forms a consensus on procedures for controlling data integrity and error recovery?

      2. Which layer is responsible for converting data packets from the Data Link layer into electrical signals?

      3. At which layer is routing implemented, enabling connections and path selection between two end systems?

      4. Which layer defines how data is formatted, presented, encoded, and converted for use on the network?

      5. Which layer is responsible for creating, managing, and terminating sessions between applications?

      6. Which layer ensures the trustworthy transmission of data across a physical link and is primarily concerned with physical addressing, line discipline, network topology, error notification, ordered delivery of frames, and flow control?

      7. Which layer is used for reliable communication between end nodes over the network and provides mechanisms for establishing, maintaining, and terminating virtual circuits;

Скачать книгу