ТОП просматриваемых книг сайта:
The Lean Book of Lean. Earley John
Читать онлайн.Название The Lean Book of Lean
Год выпуска 0
isbn 9781119096214
Автор произведения Earley John
Жанр Зарубежная образовательная литература
Издательство John Wiley & Sons Limited
• Drive to pick up a friend from the other side of town on the off-chance they might want to come and visit you?
• Make a meal when no one is hungry?
• Go to fill up the tank when you're on full already, but it's Tuesday, fill-up day?
The answers here are obvious (hopefully!). The key thing here is to ask the question: Is there a real need for me to do this? Does someone need it?
This is very simple in concept, but sometimes hard in practice. As mentioned above, this means that once you get the signal from the customer to start, stoke up the boilers, get the engines running and don't let anything get in the way until it's in the hands of the customer. At a local level this isn't too hard to do, but for a whole business, it isn't that easy. Look around the countryside at all the massive buildings dotted around with hundreds of truck-docking bays – those are warehouses. Each one filled to the gunwales with products waiting for somewhere to go or to be asked for by someone. In short: a testament to the failure of a business to maintain flow. To implement Lean properly, and get the full benefit for both you and your customers, the whole supply chain must be Lean, not just parts of it. If not, then you end up squeezing a balloon. One part gets thinner as you work on it and all that happens is that the waste you worked so hard to eliminate just pops out somewhere else and the net result is zero. I've seen so many times, Lean teams, site leaders and even COOs, clapping each other on the back saying how great their Lean programme is going and citing all the benefits delivered. However, the miserable old CFO is sitting in the corner looking at the company annual report, shaking his head and muttering to himself, “I don't see it here”. And of course, the miserable old goat is right. All that's happened is that the waste has been redistributed and changed form, not been expelled from the business, largely because flow was not maximised along the whole supply chain.
But flow is not all about eliminating waste and reducing inventory and cost, it makes your whole business more agile. With less to move around, it's a whole lot easier to change direction when the market changes or something new emerges from your R&D machine. I hear people talking all the time about Lean and Agile as if they are two different things. In my view they are one and the same thing: you can't be one without the other. I like the Agile term personally, as I think it conveys a better image of what it is all about. However, it's sometimes difficult to get the right message across given the common misconception mentioned above. An explanation I like and that seems to fit well is one that was thought up by Patrick Rigoni, a Founding Partner of SmartChain International, and goes as follows:
“True agility – combines responsiveness with flexibility to deliver flow and is ‘designed in’ with Lean and Demand Driven Replenishment.”
In Figure 1 it's all about finding ways to widen a) and shorten b). Notice too that this can apply to anything; here it is just termed “Operating Parameter”. This is deliberate as the business requirement should drive what exactly it is that you need to be Agile in: speed to market; delivery to customers; processing claims; getting round the supermarket.
I like this explanation a lot. I remember our team agonising over this for some time, trying to capture the essence of what agility was in relation to Lean in a way that is simple and easy to get your head around – after all, that's the mantra of Lean. Isn't it?
The secret to maximising flow is to identify the constraint, what's stopping you doing whatever it is, and eliminate it. Not much of a secret really, but it's surprising how difficult this can be when you don't have a good view of the end-to-end supply chain and, on top of that, the pesky thing keeps moving around! More on this later.
Before we can start taking steps to eliminate waste, we need to learn how to recognise waste when we see it. To do this we have to come back to our old friend, value. By definition, if what we are doing creates or adds value, as we have defined it above, then what we are doing is not waste. That's fairly simple. Also, by the same token, anything we do that is not adding value is waste. So all we need to do is look around for all the things that are not adding value and stop doing them. Sounds very straightforward, but there is so much of it that it's very easy to get confused and overwhelmed. This is why we categorise waste into seven different types called, funnily enough: “The 7 Wastes”. These are shown in Figure 2. In order to further help look for them, they are grouped into what they apply to: people, processes and products or services. This approach has been around for a long time and there are many articles and book chapters on the subject of waste, which define and categorise them far better than I could do here, so while not wanting to skate over such an important subject, I'll encourage you to look up one of the established texts on the subject when you have time, rather than repeat it all here. However, in simple terms, this is what they are, with a brief everyday example included:
Motion – People moving themselves, or parts of themselves, around. Having the fridge, the worktable and the cooker too far apart in the kitchen. Taking the plates from the dishwasher to the cupboard one at a time.
Waiting Time – People waiting for something to arrive or something to happen: Going and standing at the bus stop for 30 minutes when you knew there wasn't a bus due. Waiting for the kettle to boil.
Overproduction – Making more than was needed: The three extra copies of a report you printed just in case a few uninvited people showed up to the meeting. Overfilling the kettle – see Waiting Time above!
Overprocessing – Doing more than is necessary for the purpose: Polishing the underside of the table – no one's going to look! Cutting, then trimming a fence post to exactly 125.25centimetres.
Defects – Doing something wrong or breaking something: Burning the toast. Making something that's not in compliance with the required specification.
Inventory – Actually should say “excess inventory”, products or materials waiting to be used: Car dealership forecourt full of cars for sale. Five cartons of milk in the fridge.
Transportation – The product version of Motion above, products being moved around: Products in trucks moving from the manufacturer to the warehouse or on to the store. Passing the salt around the table at dinner.
Figure 2 The 7 Wastes
It's also worth mentioning that some texts quote a further, eighth waste: the misuse of capacity or resources. My belief is that this is a consequence of the other wastes rather than a waste in its own right, but that's just my opinion.
When looking for waste, you need to be absolutely ruthless, there's no room for sentiment here. If there isn't a clear and direct line of sight to customer value, then it's waste; sorry, but there you are. When you start pointing this out, you are going to become very unpopular very quickly, so it's best to prepare your audience before setting out. As a rule of thumb, 90 %+ of everything a business does is waste. If you're not seeing this, then you're either not looking hard enough or you're being too soft. Once you understand this and manage to get your leaders understanding it too, huge improvements in performance are possible. Having said that, not all waste can be eliminated. There are two types to consider. Type 1 waste is that which is associated with doing your business, such as the company accounts or QA testing. While it can't be totally eliminated, you should look for ways to pare it down to the absolute minimum, but recognise that while it is unavoidable, it's still waste. You'll get into some very