Grass and Grassland - Ian Moore

Скачать книгу

stage to the flowering stage is usually a response to length of day; most British grasses are “long day plants” and so these changes take place in them as the days lengthen from spring to early summer.

      The tiller must, however, have reached a certain size before it can respond to the increasing hours of daylight and this size varies in different grasses. If a small tiller can respond, then all the tillers will reach the necessary size during the year, before the days become too short again. In this case therefore all tillers will flower and die. Thus there will be no vegetative tillers left to continue growth and the plant behaves as an annual. If, however, the tiller cannot respond until it has reached a larger size, it will not flower until the late summer (aftermath flowering) or it may not flower that year. If, as is true of some grasses, a period of low temperature is necessary before response can take place, flowering will be delayed until the following spring. Meantime, the tiller, while still in the vegetative condition, will have produced further tillers so that the plant behaves as a long-lived perennial. Such plants produce some flowering shoots each year but always remain sufficiently vegetative to ensure continued growth.

      With few exceptions grasses have fibrous roots—in some species they are tough and cord-like—which arise adventitiously from the lowermost node or nodes of the stem. This capacity of grasses to produce numerous fibrous roots is of prime importance for it means that grasses, unlike plants with a main tap root, have great powers of recovery after injury. When the main tap root of such a plant is injured the plant probably dies; root injuries to grasses on the other hand may even stimulate new growth. Thus severe harrowing of an old pasture with heavy spiked harrows, which cut into the turf, tears out much of the matted growth, increases aeration, and brings about rejuvenation, with the result that the pasture “freshens up” with new growth. Similarly the groundsman, using “pruning” machines on the sports turf or lawn, encourages new, strong root and leaf development.

      The roots of different species vary in length and are equipped with a very great number of root hairs. In some cases, like couch grass, underground, scaly, whitish or brownish creeping stems or rhizomes are formed and both roots and scale leaves are produced from the nodes of these rhizomes. In other cases, like creeping bent (Agrostis stolonifera) and rough-stalked meadow-grass (Poa trivialis), thin, greenish or purplish, surface-creeping stems or stolons, like strawberry runners, are formed from the nodes, from which fibrous roots and green leaves are produced. Thus rhizomes and stolons are really modified stems, and grasses with such rooting, mat-forming systems cover the ground very rapidly in consequence. Such a characteristic is not always desirable and in some cases it presents serious problems. Any bud-bearing portion of a rhizome which is broken off from the root system can start a new and independent plant. Thus couch grass which can be a very serious weed on some types of arable land, becomes a menace by the very speed with which it reproduces itself. The small pieces of rhizome broken and dispersed in the course of cultivation give rise to new colonies of plants and it is not unknown for the growth of couch to be so great that the intended crop is smothered. Moreover, the diversion of food materials to the formation of such non-photosynthetic and inedible structures as stolons and rhizomes has the effect of reducing the maximum yield, and such grasses as bent and couch are, therefore, most unproductive. The highest yielding agricultural grasses, such as the ryegrasses, cocksfoot and timothy, are tufted, non-creeping species.

      The flowering stems (“culms”) of the grasses are usually cylindrical and hollow except at the nodes or joints, where the stem is firm and solid and from where the leaves emanate. Culms vary not only in size, rigidity and number of nodes but may grow erect, prostrate or arise from a curved or prostrate base. The stems are usually smooth and highly polished. The leaves are parallel-veined and arranged in two rows alternating one with another on the stem. Each leaf is composed of a lower portion known as the “sheath” which may form a cylindrical tube enclosing the stem, or may be split, with the margins overlapping one another. Near the ground, the sheath may be coloured red, purple or brown which is constant for each species and constitutes an aid to identification. In some species, only the veins are coloured. The upper portion of each leaf is called the “blade”; this may be flat, rolled up and bristle-like, or folded about the mid-rib with the upper surface inwards, while the blades may be erect, drooping, or at right angles to the sheath. The blade, usually long and narrow with parallel sides or tapering to a pointed or blunt tip, often widens out at its base to form either a ledge or ear-like projections or teeth called “auricles,” which clasp the stem. Where the blade joins the sheath there is usually a membranous outgrowth, called the “ligule,” which may be pointed, blunt or ragged, long or short, or may be represented by a line of hairs. These characteristics afford still further means of identification. The leaves of some grasses are hairy, others free from hairs (glabrous); if present, the hairs may be most abundant on the sheath, on the upper or lower surfaces of the leaf blade or, in some instances, confined to the ribs or margins.

      This key to the identification of the commoner pasture grasses by means of their vegetative characters has been compiled to enable the enthusiast when walking over a farm to distinguish the chief species making up the swards. It has been made as simple as possible and deals with only a few of the better known grasses. Readers who wish to identify a much wider range of species should consult Hubbard’s Grasses (1954).

      KEY FOR IDENTIFICATION OF COMMON GRASSES WHEN NOT IN FLOWER

Скачать книгу


1 Leaf-blades more or less flat, breadth greaterthan thickness. 2
Leaf-blades bristle-like. 17
2 Shoot flat or oval, young leaves folded. 3
Shoot round, young leaves rolled. 7
3 Base of leaf-sheath coloured, blades ribbed onupper surface. 4
Base of leaf-sheath white, blades not ribbed. 5
4 Leaf-sheath red. Lolium perenne
Leaf-sheath yellow. Cynosurus cristatus
5 Leaf-sheath thick, fleshy, blades broad, tapering. Dactylis glomerata
Leaf-sheath thin. leaf-blades narrower. 6
6 Leaves tapering, pale-green, soft; plant perennialwith short creeping stems on surface. Poa trivialis
Leaves parallel-sided, dark-green, stiff; plantperennial with underground creeping stems. Poa pratensis
Leaves short; plant annual, tufted. Poa annua
7 Hooks (auricles) present at junction of leaf-bladeand sheath. 8
Auricles absent. 11
8 Base of leaf-sheath red; blades ribbed on uppersurface, shiny under surface. 9